Vennligst vent...

Produktet ble lagt i handlekurven.Se handlevognen her
Tom handlevogn
Ukens tilbud

Komponenttilbehør

Rack PDU 2G, Metered by-Out. w.Switching,  ZeroU, 5.7kW, 208V, 21xC13, 3x C19

APC Rack PDU 2G, Metered by-Out. w.Switching, ZeroU, 5.7kW, 208V, 21xC13, 3x C19 (AP8661)


SKU: AP8661
Type: PDU
24 760,-
(19 808,- ekskl. mva)
Antall:
 
Kjøp
Ikke på lager ETA ETA ETA Må bestilles, antatt Ingen produkter på lager til spesialpris. Antatt leveringsdato er 22.12.2017
Beskrivelse

Rack PDU 2G, Switched Plus, ZeroU, 5.7kW, 208V, (21) C13 & (3) C19


APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Includes

CAN Port Terminator, Installation guide, Rack Mounting brackets, Safety guide, Sample locking IEC power cord, Serial configuration cable

Output

Nominal Output Voltage: 208V
Maximum Total Current Draw per Phase: 20A
Output Connections: (21) IEC 320 C13
(3) IEC 320 C19
Overload Protection: No

Input

Nominal Input Voltage: 208V 3PH
Input Frequency: 50/60 Hz
Regulatory Derated Input Current (North America): 16A
Input Connections: NEMA L21-20P
Cord Length: 1.83 meters
Number of Power Cords: 1
Maximum Line Current per phase: 20A
Maximum Input Current per phase: 20A

Physical

Net Weight: 7.14 KG
Maximum Height: 1829.00 mm
Maximum Width: 56.00 mm
Maximum Depth: 51.00 mm
Shipping Weight: 9.41 KG
Shipping Height: 2038.00 mm
Shipping Width: 162.00 mm
Shipping Depth: 118.00 mm
Color: Black
Units per Pallet: 42.00

Environmental

Operating Environment: -5 - 45 °C
Operating Relative Humidity: 5 - 95%
Operating Elevation: 0-3000 meters
Storage Temperature: -25 - 65 °C
Storage Relative Humidity: 5 - 95%
Storage Elevation: 0-15000 meters

Conformance

Regulatory Approvals: cUL Listed,FCC Part 15 Class A,ICES-003,UL Listed,VCCI Class A
Standard Warranty: 2 years repair or replace
Environmental Compliance: RoHS,REACH: Contains No SVHCs,Contains Lithium Battery

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.